Recessed Electrical Designs - RED

Recessed Electrical Designs, RED, is offering a new, patented way of installing electrical outlets. These new recessed outlets fit into a standard 2"x4" stud wall and will accommodate most conventional fixtures. This includes standard 120-volt receptacles, GFI units, coaxial TV cables, CAT lines, phone lines and switches. These fixtures are recessed approximately 2" into the wall allowing flat panel TV's, bookshelves, beds, couches and other furnishings to be pushed up against the wall with only the cords protruding. The single gang recessed box is available now - the box and white cover plate are sold as one unit. Receptacle sold separately. The manufacturer's recommended retail price for product A 1.00.06 is $18.00 and orders may be made by phone or e-mail. The retrofit version, along with the four gang box, will be available in the near future. Place advance orders for the four gang and retrofit box by e-mail at or by phone at 650.879.1057.

Product: RED B 4.00.06
Four Gang Box
US PATENT #6,875,937

Product: RED A 1.00.06
Single Gang Box
US PATENT #6,875,937

The electrical connections are housed in a recessed section of the box behind the sheetrock wall. These recessed designs will work with virtually any rectangular 120-volt receptacle.

Both the single gang and four gang boxes will fit GFI and low voltage devices. Receptacle sold separately.

Made in USA

Recessed Electrical Designs, RED, electrical boxes are made in the U.S.A. of a superior fire rated Polycarbonate. This material can be nailed or drilled without cracking. The recessed design can be safer than standard boxes. The recessed connection keeps plugs away from furnishings and curtains that hang down on top of conventional boxes. The 35 cubic inch box size allows for faster receptacle and conductors installation.

This recessed electrical box is the first in line of many innovative products that will be offered by RED. Upcoming products will include hinged cover plates, double, triple and four gang boxes. Different colored cover plates and retrofit boxes will also be available. This site will be updated with new products as they are offered.

The recessed box will accommodate a wide variety of devices such as phone lines, coaxial cable and other low voltage devices. The box is designed to fit in a 2x4 stud wall using 1/2 inch sheet rock. However, by backing off the screws from the bus, (the towers that the screws fit into), the box will work with thicker material such as tile or granite walls. The buses can be cut down to work with 3/8" paneling as well. Click for Instruction Sheet.

Orders may be placed by phone or email for the single gang box, which is available now. The retrofit version, along with the four-gang box will be available in the near future. Advance orders may be placed for the four gang and retrofit box by phone or e-mail.

All receptacles are sold separately.

Specification:

UL Listed
Materials for the box are FR Polycarbonate.
Materials for the cover plate are FR Polycarbonate.
Box volume is 35 cubic inches.
Box dimension in inches: 3.7 wide x 6.9 length x 3.2 depth
Cover plate inside dimension: 3.0 wide x 5.15 length x 2.0 depth

www.recessedelectricaldesigns.com P.O. BOX 530, PESCADERO, CA 94060